Main » Catalog » Airplane Parts » Miscellaneous Spare RC Parts » DY-1018 » Airplane Parts » Miscellaneous Spare RC Parts » My Account  |  Cart Contents  |  Checkout   
Categories


































































































Get Our Newsletter
Subscribe to receive the latest news & specials on our products:
Information
About Us
Membership Pricing
Shipping & Returns
International Shipping
Conditions of Use
Contact Us
Manuals
Lithium Polymer Saftey
FAQ
Dealer Information
Site Map
Gift Voucher FAQ
Grayson Hobby, Hobby & Model Construction Supplies  Retail, Loganville, GA
Dynam GY192 Head Lock gyro
[DY-1018]
Regular Price: $19.99
Special Price: $14.99

Functions:

  • The gyro has been designed for gas and electric powered RC helicopters.
  • Dual mode system: Heading lock mode or normal mode
  • The gyro can be used with computer radio and/or non-computer 4-CH radio.
  • The gyro gain can be remotely adjusted with 6-CH receiver, with 4-CH receiver it needs to adjust the gain on the ground.
  • The temperature compensation circuit has been built in the circuit.

Dimension: 20.0 x 20.0 x 10.0mm
Weight: 5.7g with Plastic Case
Operation Voltage: 4.8 V ~ 6.0V
Operation Current: 15mA (5V) 
Gyro Gain: Remote / Single Gain
Heading Lock: Remote On/Off




Installation and Set up:

Find the most ideal location in your helicopter to mount the gyro ensuring that an area of minimum vibration is chosen. Attach the double-sided adhesive tape to the bottom or the back of the gyro and mount it in the ideal position of your helicopter. The gyro must be mounted level and the axis of rotation is exactly parallel with the main shaft.

4CH Transmitter/Heading Lock Mode

  1. Connect the gyro to the rudder channel of the receiver. Disregard the remote gain control wire.
  2. Turn the transmitter and receiver powers on and set the rudder trim at the center position.
  3. While the LED lights on and the LED color is turning to Blue from Red, do not move the helicopter or the gyro. If you move it, the neutral setting can not be properly done.
  4. When the initial setting is completed and check the correct rudder movement during low altitude hovering. If you need to adjust the gain, put the helicopter down on the ground and adjust the gain manually.
  5. If the rudder control might still drift one way, put your helicopter down on the ground and adjust the length of the rudder control rod. Check it again during low altitude hovering.

6 CH Transmitter

  1. Connect the gyro to the rudder channel of the gyro and the gain control wire should be connected to AUX channel (signal) of the receiver.
  2. While the LED lights on and the LED color is turning to Blue from Red, do not move the helicopter or the gyro. If you move it, the neutral setting can not be properly done.
  3. When the initial setting is completed, switch to the heading lock mode and see if the rudder servo may drift one side during low altitude hovering. If so, adjust the rudder trim on the transmitter. Also, check and adjust the rudder servo movement and neutral position to be the same on the heading lock mode setting and normal mode setting.
  4. If the rudder control might still drift one way while the normal mode setting, put the helicopter down on the ground and adjust rudder control rod length.

Remarks and Precautions:

  1. It is very important to observe proper polarity on the connectors and wires. Connect the components as indicated, -/negative, +/positive, s/signal. Reversing the polarity may result in damage of your system.
  2. During  high-speed flight, if the  helicopter  shows  unusual characteristics, lower the gyro gain immediately until it flies normally. Or just put the helicopter on the ground immediately (4CH transmitter).
  3. Always handle the gyro with care when transporting and when operating with RC helicopters
  4. The gyro is a precision piece of electronic equipment and despite featuring a high robust sensor can suffer damage if abused, crashed or mistreated.
  5. Do not expose the gyro too strong direct sunlight or heat for too long

.



 Reviews 
 Add to wishlist 
Add Dynam GY192 Head Lock gyro to del.icio.us Add Dynam GY192 Head Lock gyro to Digg Add Dynam GY192 Head Lock gyro to Ekstreme Add Dynam GY192 Head Lock gyro to Facebook Add Dynam GY192 Head Lock gyro to Furl Add Dynam GY192 Head Lock gyro to Google Add Dynam GY192 Head Lock gyro to Newsvine Add Dynam GY192 Head Lock gyro to Reddit Add Dynam GY192 Head Lock gyro to Technorati Add Dynam GY192 Head Lock gyro to Twitter Add Dynam GY192 Head Lock gyro to Yahoo myWeb Add Dynam GY192 Head Lock gyro to Stumbleupon
Also Purchased Products
Parallel Battery Connector - Deans
Parallel Battery Connector - Deans
GH2212-10 1400kv Brushless Outrunner Motor - by Suppo
GH2212-10 1400kv Brushless Outrunner Motor - by Suppo
6" Servo Y - Harness
6" Servo Y - Harness
Dynam Flap Electronics Combo Pack
Dynam Flap Electronics Combo Pack
Dual ESC Connector - Deans
Dual ESC Connector - Deans
Detrum 17g Analog Servo
Detrum 17g Analog Servo
Dynam Main Gear Retract
Dynam Main Gear Retract
12" Servo Y - Harness
12" Servo Y - Harness
Dynam Flap Hinges - 6 Pack
Dynam Flap Hinges - 6 Pack
LED Flight Simulated LED Light Kit
LED Flight Simulated LED Light Kit
Series Battery Connector - Deans
Series Battery Connector - Deans
Grayson Hobby 2208 Series Replacement Bearing Set
Grayson Hobby 2208 Series Replacement Bearing Set
Currently viewing:  Dynam GY192 Head Lock gyro - Miscellaneous Spare RC Parts
Shopping Cart more
0 items
WishList more
There is no items on your wishlist
Specials more
Gens Ace 5500mah 5S1P 18.5v 25C Lipo battery pack
Gens Ace 5500mah 5S1P 18.5v 25C Lipo battery pack
$99.99
$79.99
Reviews more
Write ReviewWrite a review on this product!
Grayson Hobby, Hobby & Model Construction Supplies  Retail, Loganville, GA

Copyright © 2015 Grayson Hobby
(678) 682 - 9123
220 Old Loganville Road
Loganville, GA 30052
Powered by osCommerce