Technical Data

• Output: 18Amp Constant
• Max Output: 25 Amp (Burst)
• Weight: 0.67oz (19g)
• Battery Type: Use with Ni-Cd,Ni-Mh, Li-Ion, and Li-Poly batteries  (default Li-Poly)
• Input Voltage Li-poly:  2-4 Cells , 7.4V-14.8V
• Input Voltage Ni-Cd, Ni-Mh: 6-12 cells , 7.2V-14.4V
• Size: 0.85x1.02x0.27in (47x26x7mm)
• Auto throttle calibration
• AUTO CELL DETECT!!!
• Low Voltage Cutoff:  Hard / Soft (default soft)
• BEC: 2 Amp 5Volts (Suggested Use --> 2 Li-Poly=4 servos, 3 Li-Poly =3 servos)
• Timing: Low, Medium, High (default is high)
• Switching: High rate (8 KHz) switching (PWM)
• Auto Voltage cutoff:  Low, Medium, High
• Brake: Programmable On/Off  (defult Enabled)
• Max RPM: 210000 RPM(2 poles), 70000 RPM(6 poles), 35000 RPM(12 poles)
• Auto shut down when signal is lost
• Over-heat protection
• Startup modes: Normal / Soft / Super-Soft startup, can be used for both fixed-wing aircraft or helicopter models (default normal)

Click here for the Dualsky Programming card to easily program your ESC